Roll-outs

In this section you enter specifications regarding roll-outs or roll-out shelves. These specifications allow for a vast variety of roll-out designs.

Note: Explanations for the construction methods of the roll-out are the same as those for drawers.

Roll-Out Height - Back: Enter the height for the back of the roll-out. (If you want a sliding shelf, enter 0 for the back height.)
Roll-Out Height - Front: Enter the height for the front of the roll-out. This height may be less than the height of the back to allow easy access to pots, pans, etc. (If you are using a sliding shelf, enter 0 for the front height.)
Roll-Out Height - Sides: Enter the height of the sides of the roll-out. The height of the sides may be equal to the back, to the front, or neither. If the sides taper from the back height to a lower front height, enter the largest height the sides will be. (Enter 0 if there will be no sides.)
Roll-Out Width - Opening Less: Subtract the width of the roll-out from the width of the face frame opening. Enter the resulting number. (The width of the roll-out may need to be smaller than the width of the face frame opening due to the hinges used on the doors and the guides used on the drawers.)
Roll-Out Depth - Cabinet Depth Less: Subtract the depth of the roll-out from the depth of the cabinet. Enter the resulting number.