To Delete Cabinet Parts and Boards



  1. In the Edit Elevations Screen, move the mouse until the cabinet you want to edit is highlighted. (Pause to allow the highlight to settle on the cabinet you have chosen.)
  2. Click the mouse button to select the highlighted cabinet for editing.
  3. Under the "View / Delete Boards" section in the tool box that appears, click on the "View / Delete Boards" button.
  4. Then in the 3-D wire view of the cabinet that appears, move the mouse until the cabinet part or board that you want to delete is highlighted.
    Note: This is called "View / Delete Boards" because it is a fast way to find out the size of cabinets parts without looking through the whole cabinet cut list. Just touch the board you want to see the size of. The name and size of each board you highlight will appear in the top of the Tool Box.
  5. Click on the board you want to delete. A box will appear asking you if you want to delete the cabinet board you selected. Click on the Yes button if you want to delete that board from the cabinet. Click on the No button if you do not.
  6. Cabinet Solutions will stay in this Delete Board mode until you cancel out of it by clicking on the "Done" button in the bottom of the tool box.

View / Delete Boards Tool Box

Rotate

  • Click the yellow arrow to rotate the cabinet in the direction of the arrows. The two arrows on the ends will rotate the cabinet faster than the two in the center.
  • Rotate Up: Click this button to rotate the cabinet upwards.
  • Rotate Down: Click this button to rotate the cabinet downwards.
  • Move your mouse over the main image with your cabinet, hold down the Right mouse button and move your mouse in any direction.

Zoom

  • Zoom In: Click this button to zoom in on the cabinet, making the cabinet larger.
  • Zoom Out: Click this button to zoom out from the cabinet, making the cabinet smaller.
  • If you have a mouse with a Scroll Wheel, you can Scroll Wheel forward to zoom in, or Scroll Wheel backward to zoom out.

Shift

  • Click the Up, Left, Right, Down, and X arrow buttons to shift the cabinet picture in the direction of the arrow. Clicking the X will shift the cabinet to the center of the window.
  • Move your mouse over the main image with your cabinet and hold down Shift and the Right mouse button together and you can shift your image around any direction.

Time Savers

  • These buttons will help you save time by doing all the work for you.
  • Wainscot / Doors Only: Clicking this button will delete all the boards in the cabinet except for the doors. This will prepare the doors to be used with Wainscot panels. (See Doors & Drawer Fronts for help with using Wainscot.)
  • Face Frame Only: Clicking this button will delete all the boards in the cabinet except for the face frame. This feature only works in Face Frame mode.